Automation for your Cabinet Garden™ Home Hydroponic Solution
August 17, 2016

Automation For Your Cabinet Garden™

Adding plug n’ play automation to your Cabinet Garden™ makes growing easy. Four MotorLeaf hardware units are available to help you grow with confidence.

heart-iconHEART

 

This is one of four hardware units by MotorLeaf that can be added to your Cabinet Garden™ to automate your system depending on the level of automation you desire.

It all starts with the MotorLeaf HEART. You will be able to monitor major aspects of your Cabinet Garden™. You can facilitate custom settings, so that the hardware will automate your grow equipment. You will be able to receive alerts based on custom set points to let you know when your garden needs your attention. Simply plug it in and it quickly start monitoring and collecting Air Temp, Humidity, and Light Level data from your Cabinet Garden™.

You can monitor your grow via HD Video and get Motion Detection alerts. Connect the lighting hardware and feeder pump to start automating their operation in seconds. The HEART’s easy-to-use interface is accessible online or offline, via any wireless enabled device (Desktop, Laptop, Tablet, and Smartphone). You will be able to check your grow space environmental history, via easy to understand charts. You can even allow your friends access via a ‘view only’ profile.

HEART Automation for Cabinet Garden™ Hydroponic Grow Solution HEART Automation for Cabinet Garden™ Hydroponic Grow Solution

HEART Automation for Cabinet Garden™ Hydroponic Grow Solution

powerleaf-iconPOWERLEAF

 

This is one of four hardware units by MotorLeaf that can be added to your Cabinet Garden™ to automate your system depending on the level of automation you desire.

The MotorLeaf POWERLEAF is an additional piece of hardware that can be connected to your HEART automation unit. The POWERLEAF allows you to connect other pieces of grow equipment including an Air Cooler, Heater, Humidifier and/or Dehumidifier to the network working with your HEART Sensors. The POWERLEAF connects wirelessly to the HEART which tells it when to turn on and off, based upon pre-set times or sensor readings from the HEART and DROPLET. The easy-to-use  interface is accessible online or offline, via any wireless enabled device (Desktop, Laptop, Tablet, and Smartphone).

POWERLEAF Automation for Cabinet Garden™ Hydroponic Grow Solution

POWERLEAF Automation for Cabinet Garden™ Hydroponic Grow Solution

POWERLEAF Automation for Cabinet Garden™ Hydroponic Grow Solution

 

driplet-iconDRIPLET

 

The MotorLeaf DRIPLET is an additional automation hardware unit that can be added to your Cabinet Garden™ to automate the delivery of pH and nutrients based upon timer setting or actual live grow conditions.

DRIPLET Automation for Cabinet Garden™ Hydroponic Grow Solution

DRIPLET Automation for Cabinet Garden™ Hydroponic Grow Solution


droplet-iconDROPLET

 

The MotorLeaf DROPLET is an additional automation hardware unit that monitors everything that’s connected to your water reservoir. Every 4 seconds the DROPLET wirelessly sends data to the HEART, including information on water level, temperature, pH level, and nutrient levels – essential information for any grower to know, anytime. Additionally when connected to the HEART you can control your water temperature. If you have the POWERLEAF you will also be able to control the water level.

DROPLET Automation for Cabinet Garden™ Hydroponic Grow Solution

DROPLET Automation for Cabinet Garden™ Hydroponic Grow Solution